DTC Dodge P0023 Short Explanation

The video focuses on the basic Dodge specific diagnostic error code.
Contents:
0:21 Basic DTC analysis according to OBD2 protocol standard.
1:48 Insight into programming
an explanation of what a bit is and how a byte is formed
decoding the Error Code to the base programming
2:58 A diagnostically understandable description of the Diagnostic Trouble Code
3:05 Basic error definition
Possible causes or errors of the car and its parts describing the mentioned error

We will continue to work on improving the content.
Our efforts at Maxidot s.r.o.the video content gets better.

#maxidot #dtc #howto #diagnostictroublecode #dodge




Make:
Dodge
Code:
P0023
Definition:
BANK 2 CAMSHAFT 2 POSITION ACTUATOR CIRCUIT OPEN
Description:
The Variable Valve Timing (VVT) system continuously varies the Camshaft target position based on the engine operating parameters. Based on these parameters, the Powertrain Control Module (PCM) calculates or models the optimum Camshaft position. The Camshaft angular position is varied by the oil control valve. The VVT solenoid pushes on a plunger (spring loaded spool valve) in the center of the Oil Control Valve (OCV) which directs oil pressure to the hydraulic actuator (Phaser) on the Camshaft Sprocket to change the Camshaft position relative to the Crankshaft position. The VVT Solenoid, acting on the Oil Control Valve and Phaser, is controlled by the PCM. The Camshaft Position (CMP) Sensor is used to monitor the position of the Camshaft.
Cause:
VVT EXHAUST 2 or 2 SOLENOID DRIVER CIRCUIT SHORTED TO GROUNDVVT EXHAUST 2 or 2 SOLENOID DRIVER CIRCUIT SHORTED TO VOLTAGEVVT EXHAUST SOLENOID 2 or 2 DRIVER CIRCUIT OPEN OR HIGH RESISTANCEVVT INTAKE SOLENOID 2 or 2 GROUND CIRCUIT OPEN OR HIGH RESISTANCECAMSHAFT 2 or 2 POSITION SOLENOIDCAMSHAFT 2 or 2 POSITION SOLENOID