Скачать или смотреть Play Sega Master System games On ESP32 Espressif Systems

Sega Master System emulator running on an ESP32
Performance looks awesome for only one core being used...
This is a port of #Sega_Master_System to the #ESP32 chip.
It will run most Sega Master System roms at full speed .
(However, because of the low speed of the SPI LCD used and the overhead of pushing pixels to it, the frame rate is limited to 15-20FPS for now.

Code: https://github.com/espressif/esp32-ne...

If you enjoyed those videos, then please subscribe to my channel
which I update every week
👉 Subscribers : https://bit.ly/2EpEwrU


Display
To display the output, please connect a 320x240 ili9341-based SPI display to the ESP32 in this way:

Pin GPIO
MISO 25
MOSI 23
CLK 19
CS 22
DC 21
RST 18
BCKL 5
(BCKL = backlight enable)

Also connect the power supply and ground. For now, the LCD is controlled using a SPI peripheral, fed using the 2nd CPU. This is less than ideal; feeding the SPI controller using DMA is better,

Controller
To control , connect a Playstation 1 or 2 controller as such:

Pin GPIO
CLK 14
DAT 27
ATT 16
CMD 2
Also connect the power and ground lines. Most PS1/PS2 controllers work fine from a 3.3V power supply, if a 5V one is unavailable.

ROM
This emulator does not come with a ROM. Please supply your own and flash to address 0x00100000

------------------------------------------------------------------------
About Social Media, Business, and Blogging
------------------------------------------------------------------------

   / djamaluk  
  / djamal.uk  
  / djamaluk  
https://Djamal.UK


Code and Schematic OR Any Questions Please let me know in the comment section below



Thank you everyone for stopping by my youtube channel I would love to hear from you, so leave a comment to let me know you were here!