Engine & Transmission Mounts Replacement - Toyota Camry

This video will show you how to replace the engine and transmission mounts on a 2003 Toyota Camry with the 2AZ-FE I4 engine. The mount layout design for this Camry is also shared with the Toyota Avalon, Venza, Sienna, RAV4, Highlander and Lexus ES330 / ES350. Mount replacement on Toyota's 2GR-FE can be found here:    • Toyota / Lexus Engine & Transmission ...   The four replacement mounts were part of a complete replacement kit. The replacement of these parts require no special tools outside of jack stands and a hydraulic jack.
Engine and transmission mounts will exhibit signs of wear when a clunking sound or rattling noise is noticed during acceleration from a dead stop (engine torque pulling on the front worn out mount), the torque rod bushings being broken or excessive vibration while driving the car. The front motor mount takes the most stress. Simple test: With the hood open and the engine running, have someone observe the engine (looking at it from the side of the car). Place the transmission in drive, use your left foot to apply the brakes (also use the parking brakes) and rev the engine with your right foot. If your partner sees the engine tilting up a lot during the rev up, the front mount is considered shot. It's normal for it to tilt a little but not a lot. If the front mount is really bad, the sides are probably stressed out as well to compensate for the worn out front mount. Also, worn mounts will place stress on your exhaust down pipe and could wear out its flex pipe resulting in exhaust leaks and noise.

Torque Specs:

1. Upper engine movement torque strut: 47 lbs
2. Driver side transmission mount nuts: 70 lbs
3. Passenger side lower motor mount nuts: 70 lbs
4. Front side motor mount bolt: 64 lbs

If you'd like to make a donation to the channel, please follow the link below: https://paypal.me/HardlyMoving?locale...

Toyota Camry, Avalon, Lexus ES 300/330 (02-06) & Toyota Solara (02-08) Haynes Repair Manual (Does not include information specific to the 2005 and later 3.5L V6 engine.)
https://amzn.to/3yUTgcX

Parts & Specialty Tools:

Anchor 9211 Front Engine Mount
https://amzn.to/2YEci6H

Anchor 9212 Engine Mount (Passenger Side)
https://amzn.to/3iaKLS4

Anchor 9165 Transmission Mount
https://amzn.to/2NA4Rr5

Milwaukee Electric Tools 2558-20 Fuel Ratchet M12 Fuel 1/2" Ratchet (Tool Only)
https://amzn.to/2B2YRUH

M18 Fuel Onekey 1/2" High Torque (1,400 lbs!) Impact Wrench
https://amzn.to/2XvxPN3

As an Amazon associate, I earn from qualifying purchases. Thank you for your support!

Please Subscribe: https://goo.gl/x6fySQ