How to Replace Front Lower Control Arms 1994-2004 Ford Mustang

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com https://trq.video/ib-1ASLF00717

This video shows you how to install new front lower control arms from TRQ on your 1994-2004 Ford Mustang. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.

This repair was done on a 2003 Ford Mustang Base 3.8L Convertible 2-Door RWD Automatic and the process should be similar on the following vehicles:
1994 Ford Mustang
1995 Ford Mustang
1996 Ford Mustang
1997 Ford Mustang
1998 Ford Mustang
1999 Ford Mustang
2000 Ford Mustang
2001 Ford Mustang
2002 Ford Mustang
2003 Ford Mustang
2004 Ford Mustang

Tools you will need:
• Pry Bar https://trq.video/o5i-1AXAA00020
• 18mm Wrench
• 21mm wrench
• 8mm Wrench https://trq.video/oi8-1AXAA00011
• 15mm Socket https://trq.video/obV4-1AXAA00015
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Dead Blow Hammer
• Strut Spring Compression Tool
• Trim Tool Set https://trq.video/oarz-1AXXX00006
• Locking Pliers https://trq.video/onY-1AXAA00139
• Pliers
• Wire Cutters
• Air Chisel
• 15/16 Inch Socket
• E8 Inverted Torx Socket
• Ratchet https://trq.video/obYY-1AXAA00016
• Socket Extensions https://trq.video/obV4-1AXAA00015
• Torque Wrench https://trq.video/oa3C-1AXAA00044
• 15/16 Inch Wrench
• Block of Wood
• Copper Anti-Seize
• Marker / Writing Utensil
• Floor Jack https://trq.video/oaqv-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oacJ-1AXAA00065
• Pick https://trq.video/oYc-1AXAA00037
• Pole Jack
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Ford Mustang 4th Generation 1994-2004:    • Ford Mustang 4th Generation 1994-2004  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.