Скачать или смотреть INFINIX NOTE 12 5G BACK PANEL REPLACEMENT | HOW TO CHANGE INFINIX NOTE 12 5G BACK PANEL

How to Change Infinix Note 12 5G Back Panel

Replacing the back panel of your Infinix Note 12 5G requires careful handling to avoid damaging internal components. Follow these steps to safely replace it.

Tools Required:

✔ New Infinix Note 12 5G back panel
✔ Suction cup
✔ Plastic pry tool or guitar pick
✔ Heat gun or hairdryer
✔ Adhesive glue/tape (for reassembly)
✔ Microfiber cloth & isopropyl alcohol (for cleaning)

Step-by-Step Guide

1. Power Off Your Device

Turn off your Infinix Note 12 5G completely.

Remove the SIM tray using a SIM ejector tool.

2. Apply Heat to Loosen the Adhesive

Use a heat gun or hairdryer to warm the edges of the back panel for about 1-2 minutes at 60-80°C.

This softens the adhesive, making removal easier.

3. Remove the Back Panel

Place a suction cup on the back panel and pull gently to create a small gap.

Insert a plastic pry tool or guitar pick into the gap and carefully slide it along the edges to separate the adhesive.

Work slowly to avoid damaging internal components.

4. Clean the Surface

Remove any leftover adhesive using isopropyl alcohol and a microfiber cloth.

Ensure the surface is clean and smooth before installing the new panel.

5. Install the New Back Panel

Apply adhesive glue (B-7000) or double-sided adhesive tape around the edges.

Align the new back panel properly and press it firmly into place.

Hold the panel down for a few minutes to ensure proper adhesion.

6. Let the Adhesive Set

If using glue, let the phone sit for 30-60 minutes to allow the adhesive to bond securely.

7. Final Checks

Reinsert the SIM tray and power on the phone.

Check for proper fitting and ensure the panel is securely attached.

Additional Tips:

✔ Use an original or high-quality replacement panel for the best fit and durability.
✔ Avoid using metal tools to prevent scratches or internal damage.
✔ If your phone has a fingerprint sensor on the back, make sure it is properly connected before sealing the panel.

Would you like help finding a replacement back panel online?