Скачать или смотреть MiSTer FPGA SNES Controller Adapter | DIY USB Build Guide (Daemonbite Tutorial)

Build your own SNES Daemonbite adapter for MiSTer FPGA and use your original SNES controllers with modern FPGA hardware. This step-by-step DIY guide covers the parts, wiring, programming, and testing process using a 3D-printed case.

In this video I show how to build a DIY Daemonbite adapter for OEM SNES controllers to work perfectly with MiSTer FPGA. We go over required components, Arduino programming, assembly tips, and testing.

Parts Used:
• Arduino Pro Micro (USB-C)
• Female SNES controller port
• 22 AWG silicone wire
• Shrink tubing (⅛"–3⁄16")
• 3D-printed Daemonbite case: https://shorturl.at/vl4Fe
• 12 mm M3 hex screws + 5 mm M3 brass inserts

💾 Software Links:
• DaemonBite Firmware – https://github.com/MickGyver/DaemonBi...
• Arduino IDE – https://www.arduino.cc/en/software/

🎮 This project is part of my DIY Adapter Series covering NES, SNES, N64, Genesis and Saturn controllers for MiSTer and PC. Subscribe to The Lounge for upcoming build guides and 3D-printing tutorials.

NES Daemonbite Adapter:    • MiSTer FPGA NES Controller Adapter | DIY U...  
Genesis Daemonbite Adapter:    • MiSTer FPGA Sega Genesis / Megadrive Contr...  
Saturn Daemonbite Adapter:    • MiSTer FPGA Sega Saturn Controller Adapter...  

Don't forget to also check out the new 24-bit analog I/O board for MiSTer by Retrocastle. I built a brand new MiSTer utilizing this board and you can find the video link below:
   • MiSTer FPGA 2025 Setup & Build Tutorial | ...  

Music used in this video:
Airport Lounge - Disco Ultralounge by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. https://creativecommons.org/licenses/...

Source: http://incompetech.com/music/royalty-...

Artist: http://incompetech.com/

#RetroGaming #MiSTerFPGA #DIYElectronics #ConsoleModding #Daemonbite