How to Replace Rear Axle Seal 2003-2009 Dodge Ram 2500

Описание к видео How to Replace Rear Axle Seal 2003-2009 Dodge Ram 2500

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-84-fj

This video shows you how to install a new TRQ axle seal on your 2003-2009 Dodge Ram 2500.

This repair was done on a 2008 Dodge Ram 2500 SLT 5.7L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2003 Dodge Ram 2500
2004 Dodge Ram 2500
2005 Dodge Ram 2500
2006 Dodge Ram 2500
2007 Dodge Ram 2500
2008 Dodge Ram 2500
2009 Dodge Ram 2500

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obTY-1AXAA00013
• Pry Bar https://trq.video/oag3-1AXAA00020
• 21mm Socket
• 24mm Socket
• Air Blow Gun
• Bearing Race and Seal Driver https://www.1aauto.com/*/i/1axaa00038...
• Brake Caliper Hanger https://trq.video/ooT-1AXAA00439
• Locking Pliers https://trq.video/oqx-1AXAA00139
• 9/16 Inch Socket https://trq.video/ocue-1AXAA00016
• Torque Wrench https://trq.video/obvz-1AXAA00044
• Block of Wood
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags https://trq.video/oXd-1AXSS00035
• Copper Anti-Seize
• Gloves https://trq.video/obF9-1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Bucket
• Chisel https://trq.video/onX-1AXAA00055
• Floor Jack https://trq.video/oaNJ-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oaAi-1AXAA00065
• Large C-Clamp
• Magnet - Extendable
• Pick https://trq.video/oabT-1AXAA00037
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Wheel Chocks
• Wire Brush https://trq.video/oBn-1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Dodge Ram 2500 2nd Generation 2003-2009:    • Dodge Ram 2500 2nd Generation 2003-2009  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке