Kenwood TM-V71A MARS/CAP Modification Part 2 FULL MOD

Описание к видео Kenwood TM-V71A MARS/CAP Modification Part 2 FULL MOD

Here's part 2 of the mod for the TM-V71A. This opens the TX up the rest of the way. It's not to difficult. Do this mod at Your own risk..
Be careful if you try this not to over heat the resistor. It could damage the board. Don't pull up to hard on the resistor, you might end up pulling up the trace on the board and that would be bad too! Sorry for the long delay in getting this one done. Thanks for looking at my channel. Check out Part 1 for the Wire at W601 to be cut. Here's the link:   • Kenwood TM-V71 MARS/ CAP MODIFICATION...  

Комментарии

Информация по комментариям в разработке

Похожие видео