Скачать или смотреть How To : Transmit CAN Data from a MoTeC Dash to Mainline Dyno (V2 Firmware) - Tuned By Shane T

We discuss the method used to create a CAN Transmit Template to send channels generated in the MoTeC Dash to the Mainline Dyno so that the Dyno receives the channels in the same format it is expecting from a MoTeC M1 Series ECU with General Purpose Firmware Can messages on CAN ID 0x640 (hex) 1600 (decimal)

This is a quick method to create the channels and verify them within the Dash before sending them to the Mainline so you can be sure the values are correct.

Once the templates are written and tested in the dash you can expect them to be correct in the Dyno as well.

For information on how to setup the Mainline Dyno to accept this CAN message see https://www.mainlinedyno.com.au

Here is a link to another video from our colleague Mitch Minton which provides a method to determine the best scaling values for a particular channel. This helps with channels of different bit lengths to get the most equivalent values.    • Fraction Finder for Floating point Scalars