Скачать или смотреть Car Generator Pulling Machine I Car Alternator Pulling Machine I Copper Puller I Pulling Rod

What are the differences between the starters and generator?
It can be easily seen that generator is different from starter in two aspects for the last article. Below are other two views stating their differences:
1.Design focus:
The design of the starter focuses more on how to efficiently use electrical energy to generate mechanical motion. Therefore, the rotor of the starter is usually designed to be relatively light so that it can quickly respond to changes in current and generate sufficient torque, while the stator is responsible for providing a stable magnetic field to ensure that the rotor can rotate smoothly.
However, the design of the generator focuses more on how to efficiently convert mechanical energy into electrical energy. Since the capacity of the generator is usually large, the starter is usually large and heavy so that it can generate sufficient power output during the rotation of the rotor; the stator also needs to have sufficient magnetic field strength and stability to ensure that the generator can continuously and stably output electrical energy.

2.Performance requirements:
The starter is more concerned with mechanical-related indicators, such as stall torque, minimum torque, maximum torque, torque fluctuation and other indicators, because the starter output power refers to mechanical power. In order to meet this requirement, the design of the starter needs to fully consider its internal electromagnetic relationship, mechanical structure and heat dissipation performance and other factors.
Generators are more concerned with electrical-related indicators, such as no-load voltage waveform distortion rate, steady-state voltage regulation rate, transient voltage regulation rate, frequency regulation rate and other indicators, because the generator output power refers to electrical power. In order to meet these requirements, special generator design is usually required.

What are the advantages of this generator recycling machine?
As the video shown, today’s recycling machine can cut and pull in one, processing versatile kinds of generators. It is easy to operate and recycle the copper windings in an efficient way. Of course, driven by hydraulic system, our generator wrecker machine is of low noise and safe equipped with the pedal switch.
As to the working steps, you just need to use the cutting part to cut the end of starter then use the pulling part to force the copper out, convenient and rapid, besides, its compact structure and comprehensive functions attract many customers especially in Europe and America.

👉 Like what you see? Hit subscribe for more real-world recycling solutions!
Want more details, just visit:
https://3t-starterrecycle.com/car-alt...
Email: [email protected]
wechat/whatsapp/viber: +86 13772508206
------------------------------------------------------------------
Related machine visiting linkage:
90-250mm ST-400 /household starter cutting machine:
https://3t-starterrecycle.com/product...
--------------------------------------------------------------------------
50-500mm diameter BSM-50 starter wrecker machine:
https://3t-starterrecycle.com/product...
---------------------------------------------------------------------------
Transformer compressor starter wrecker machine:
https://3t-starterrecycle.com/product...
-----------------------------------------------------------------------
1800-2200kg/h BSP200 starter pulling machine:
https://3t-starterrecycle.com/electri...
-----------------------------------------------------------------------