Configuration of eTOUCH switch with BroadLink RM PRO

Step 1. Switch Off and On the MCB after install the eTouch Smart Switches
(Before setup programming).
Step 2. Download "e-Control" from Play Store (Android) / APP Store (IOS)
Step 3. Log-in to "e-Control" APP and configure your Broadlink RM Transmitter
(2.4Ghz Wifi for connection)
Step 4. Once done (Step 3), Go to Left Top Concern "+" and press "Add Remote"
Step 5. Select and press the "eRemote" (RM Pro+ Transmitter ) that will be use to add commend
Step 6. Go "Search" on the top and key in "eTouch" and press search
Step 7. Look for the No. of Keys remote needed and press on it
Step 8. Once done, follow the following step on the below to do the programming setup for eTouch Smart Switch.

On & Off in a Button
Touch & hold the active touch area of the switch until the wifi light blink 1 time then release.
Press the button of 'eTOUCH ' from "e-Control" APP (Step 8)

On in a Button
Touch & hold the active touch area of the switch until the wifi light blink 2 time then release.
Press the button of 'eTOUCH ' from "e-Control" APP (Step 8)

Off in a Button
Touch & hold the active touch area of the switch until the wifi light blink 3 time then release.
Press the button of 'eTOUCH ' from "e-Control" APP (Step 8)
Pairing a Remote Control

On & Off in a Button
Touch & hold the active touch area of the switch until the wifi light blink 1 time then release.
Press the button of 'eTOUCH ' Remote Control (either button)

On in a Button
Touch & hold the active touch area of the switch until the wifi light blink 2 time then release.
Press the button of 'eTOUCH ' Remote Control (either button)

Off in a Button
Touch & hold the active touch area of the switch until the wifi light blink 3 time then release.
Press the button of 'eTOUCH ' Remote Control (either button)

Step 9. Test it after done.