How to Replace Front Brakes 1994-2004 Chevy S10

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ic/1ABFS00327

This video shows you how to install new, quality TRQ brake pads and rotors on your 1994-2004 Chevy S10. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10

Tools you will need:
• Pry Bar http://1aau.to/ogc/1AXAA00020
• 19mm Socket http://1aau.to/ojK/1AXAA00043
• Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/ow/1AXAA00288
• Brake Caliper Hanger http://1aau.to/oaE/1AXAA00084
• Adjustable Wrench
• Channel-Lock Pliers http://1aau.to/obc/1AXAA00139
• Straight Cutters
• 3/8 Inch Air Impact Gun
• Ratchet http://1aau.to/oyu/1AXAA00016
• Socket Driver
• Torque Wrench http://1aau.to/ooD/1AXAA00044
• Anti-Seize Grease
• Bearing Grease
• Block of Wood
• Brake Fluid
• Brake Parts Cleaner
• Paper Towels http://1aau.to/odD/1AXSS00035
• Sandpaper
• 10mm Allen Wrench http://1aau.to/oS/1AXAA00007
• 10mm Hex Socket
• Brass Punch
• Drain Pan http://1aau.to/ocM/1AXAA00320
• Floor Jack http://1aau.to/ogX/1AXAA00068
• Hammer http://1aau.to/oge/1AXAA00091
• Jack Stands http://1aau.to/ogm/1AXAA00065
• Wire Brush http://1aau.to/ocd/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
Chevy S-10 2nd Generation 1994-2004:    • Chevy S-10 2nd Generation 1994-2004  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.