etrailer | Let’s Check Out the Anderson Series Cable for Redarc Portable Solar Panels

Click for more info and reviews of this Redarc RV Solar Panels:
https://www.etrailer.com/Accessories-...
Check out some similar RV Solar Panels options:
https://www.etrailer.com/dept-pg-Acce...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Reda...
Hello, everybody, this is Jeff at etrailer.com. Today, we're gonna take a look at this 12-inch long series cable with the Anderson connectors on both ends for the Redarc portable solar panels. Now, this cable has the Anderson connectors on both ends that'll connect two Redarc portable solar panels together in series and increases your total system voltage. So connecting two identical panels of the same wattage in series will multiply the system voltage by two, and it keeps the output current or amperage at the same level. Now, the Anderson connectors provide a nice, easy plug and play set up. These Anderson connectors are common connections used in RVs, and Redarc uses the industry standard Anderson SB50 connectors across the solar range.

These high quality Anderson plugs are simple, fast to connect, there's no screw terminals, and no risk of poor connections from the frayed wires or the loose terminals. So for the most part, no tools are required to connect your solar products together. You just plug these in and you're ready to go. A few specs on this cable. It's 12-inches long.

The wire size used is 11 gauge wire. It has a 40-amp current rating and a 50 volt DC max voltage rating. But that should do it for the review on this 12-inch long series cable with the Anderson connectors for the Redarc portable solar panels..