Easy Quest 2 Controller Teardown & Assembly (Quest 2 Drift Fix 2023)

​ This is an Easy Quest 2 Controller Teardown and Assembly procedure. I walk step by step through the entire process needed to disassemble the controller down to the circuit card level and then reassemble the entire controller.

This tip filled procedure might provide you the information needed to successfully disassemble and repair your defective or broken Quest 2 controller. These may help you repair drift, rebuild the transducer, replace the joystick, fix sticking buttons, defective triggers, broken controller rings and other problems that can affect your controller.

This procedure will show you how to completely disassemble the handle, so disconnecting and connecting the main circuit board ribbon cable is easy. 09:20

Most of the video is recorded close up, so you can get the best look at the work being done. At times, I'll use a magnifier to provide an even more detailed view for the work in progress.

🔥🔥Transducer Rebuild-    • Fix Quest Controller Drift- Rebuild t...   🔥🔥

⭐Below are Amazon associate links, if you buy one, I get a shiny nickel or two. I'd appreciate the support.

Electronic Contact Cleaners for Controllers
⚛️⚛️WD-40 Specialist Contact Cleaner Spray https://amzn.to/3BAV5Bh
⚡⚡CRC 02130 QD Contact Cleaner https://amzn.to/3cORvXF
🔌🔌CRC 05103 QD Electronic Cleaner https://amzn.to/3QafnU9

New Joystick and tools.
💲💲💲 https://amzn.to/47ZCVoS 💲💲💲

Two transducers, thumbstick caps and tools
🪛https://amzn.to/47ZCVoS 🛠️

Two transducers only
🌩️ https://amzn.to/4eXmhbx 🌧️


🛑 Couple of Cautions
It is possible to damage your controller during teardown and reassembly. You shouldn't do it, unless you're willing to accept that fact. If its not working and you fix it, that's great. If its not working and its still not working when you're done, you're not any worse off.

ESD or electro static discharge can damage electronic components. I wear an esd strap and work on an esd surface during this video. You should take similar precautions when performing your repairs.

If you've got questions, please hit me up in the comments. I'm happy to help if I can. Your question might help someone else out.

If the video helps you out, please hit that like button. 👍👍👍
If you want to make my day, Subscribe, because I can use all the friends I can get.

Index
00:00 Intro
01:18 Tools you need
01:46 Begin Teardown
02:35 Remove cover
03:55 Remove screws
07:07 Screw totals
07:50 Battery compartment
08:00 Compartment screws
08:35 Remove ring cover
09:12 Remove handle side
09:20 Removing Handle
10:08 Handle ribbon cable
10:13 Ribbon cable latch
11:07 Circuit board layout
12:08 Circuit board ribbon cables
13:58 Circuit board screws
14:08 Umcc cable removal
15:46 Remove circuit board
15:56 Buttons
16:15 Start reassembly
17:21 Install Circuit Board
19:31 Umcc cable installation
20:19 Ribbon cable install
21:12Handle reinstall
21:35 Handle ribbon cable install
21:52 Trigger install
22:49Handle side install
23:15 Ring cover install
24:06 Batter compartment screws
24:52 Plate screws install
27:37 Thumbstick install
28:13 Cover plate install
28:54 Strap install


#vr #oculus #controller #fix #easy #drift #instructions #howto #quest2repair