Hyundai Getz – How to Change Spark Plugs – Complete Guide

How to change spark plugs on a 2005-2011 Hyundai Getz, with 1.4L 4-cylinder (G4EE) or 1.6L 4-cylinder (G4ED) petrol engines. These engines are also found in 2003-2010 Hyundai Accent models.

We cover all the tools, parts and steps that should be followed for changing the four spark plugs, including how to set and check the electrode gap of the spark plugs.

Jump to Section:
0:00 Introduction
00:15 Tools and parts
01:07 Setting or checking spark plug gap
02:15 Removing old spark plugs and leads
05:16 Installing new spark plugs and reinstating leads
07:46 Conclusion

Parts used:
Hyundai 18814 11051 spark plug x4 (Comes as NGK BKR5ES-11 spark plug)
Spark plug gap required = 1.0 – 1.1mm
Spark plug tightening torque = 21lb-ft (29Nm)
All genuine part numbers were found by entering vehicle VIN into PartSouq:
https://partsouq.com/

Tools used:
10mm socket
5/8” or 16mm spark plug type deep socket (typically with magnet or rubber insert)
Socket wrench to suit above sockets, with extension
Torque wrench to suit above sockets
Spark plug gapping tool – coin gauge, wire gauge or feeler gauge type (to suit 1.0-1.1mm gap)
Telescopic magnet pickup tool (optional)
Safety glasses and nitrile gloves are recommended

Disclaimer: At 2nd Gear Low, we love working on cars, but we are not trained mechanics. We like completing maintenance and modifications to all sorts of cars and filming it for your entertainment, but we can’t promise that you won’t harm yourself, someone else, your car or your warranty by trying this. Talk to a qualified mechanic if you are ever unsure about any part of a job that you choose to try yourself.