CA Technologies Wheel Bearing Grease Tool for Can-am X3 Maverick, Polaris RZR, Honda Talon Explained

Can-Am Models:
https://catechusa.com/products/can-am...

Honda Talon:
https://catechusa.com/products/honda-...

Polaris Kit:
https://catechusa.com/products/polari...

UTV SXS Bearing Grease Tool explained with bearing cut in half to review what happens on the inside. Used with Can-am Maverick X3, Polaris RZR Razor 570 800 900 1000 Turbo S, Honda Talon.
Here we explain how exactly our wheel bearing grease tool works. This is an important money saving tool. In the video you can see how the bearings are lacking proper lubrication. By using our tool you have saved yourself time and money in bearing replacements.

We make these tools for the Can-Am, Polaris and Honda UTV SxS OHV products.

On all makes we have a couple different ways to go about greasing your bearings:

On vehicles primarily used in water and or mud conditions in which they may spend a fair amount of time submersed and where bearings are more susceptible to outside contaminants. It is advisable to fill the wheel bearing just enough to begin to push grease out of the bearing and then stop. This allows grease to form a protective barrier around the ball bearings, cages, and the race to protect it from water and mud intrusion which is a large factor in bearing failure. On used bearings inspect grease that is expelled from the bearing for overly worn or already contaminated grease. On new bearings skip this step and stop when grease first appears around the seal.

On vehicles primarily used for fast pace riding where water is rarely seen and high speed is a normal activity, only apply 4-6 pumps of grease into the bearing, As you are not in need of a protection barrier and simply need to apply grease to the inside for lubrication and longevity purposes.

Visit our website to purchase yours today.

https://catechusa.com