Скачать или смотреть How to clean a rusted dirty bike chain. 4 different ways!

0:00 - Intro / Rag
1:02 - Soap, Brush & WD-40
1:27 - Degreaser
2:01 - Vinegar / Outro

A dirty bike never looks good. However, I personally think a dirty bike with a clean chain looks better than a clean bike with a dirty chain. Luckily, there are a few ways to remove the rust and gunk. Starting with things you’ll have around the house. And, working up to making any chain look as good as new.

The first method is to simply use a rag, some elbow grease and a bit of patience. I think you see where I’m going with this. Just backpedal the bike for as long as you can through the rag and the rust will slowly disappear.

Moving up, hot water soap and a bristly brush is the next best option. Here I’m using a dustpan brush however anything like this should work fine. Same as the last option backpedal the bike for as long as you can, this time it should work a bit quicker.

Next, if you have WD-40 or something like it, spray some of it on the chain and make sure not to get any on your rotor.

Lastly, for the most overkill of methods, use a degreaser. I personally don’t have any, so I use someone else’s video. Their video will be in the description. Take your chain off and put it into the degreaser. You could use an ice cream tub or cut off half a plastic bottle. Then let it soak overnight. In the morning all the rust will magically disappear. As if you did one of the previous methods all day.
After doing any of these make sure to lube your chain. So that’s it for this week’s video. If you enjoyed it, please make sure to do what every other YouTuber tells you to do. Thanks, guys.