Скачать или смотреть How to Connect PC to Siemens Relay using DIGSI 4 Software | Communication Setup

🔧 *Learn how to establish communication between Siemens DIGSI 4 software and SIPROTEC/Reyrolle protection relays!* In this step-by-step tutorial, we’ll configure the connection to read settings, upload configurations, and monitor relay data—essential for protection engineers and technicians.

*⭐ In This Video, You’ll Learn:*
✅ Required hardware: USB/Serial cables, converters, & PC interfaces
✅ Configuring PC communication ports (COM settings)
✅ Setting relay addresses & DIGSI 4 device properties
✅ Establishing online mode for real-time data monitoring
✅ Troubleshooting common connection errors (timeouts, access denied)
✅ Safety precautions when interfacing with live relays

*🛠️ Tools Used:*
Siemens DIGSI 4 (Version 4.9x)
SIPROTEC 4 Relay (e.g., 7SJ86, 7UT8x)
USB-to-Serial Converter (e.g., CP5711, MOXA)
RS485/RS232 Cables
Few things we have to check for communication
First checking com port
Second checking Pset version
Third checking vd address
#DIGSI4 #SiemensRelay #ProtectionEngineering #ElectricalEngineering #SubstationAutomation #RelayTesting #SIPROTEC
Preparation for communication cable.

   • How to Make a Siemens Relay Communication ...