Pi5, NVMe Base, OpenPlotter 4 (beta), MacArthur HAT, O-Charts Dongle - The best open-source setup!

In this video, we set up the Pi5 with an NVMe SSD base from Pimoroni, we look at the progress on OpenPlotter 4 and fix the MacArthur HAT to the Pi5 to get the boat data across. We also look at the 0-charts USB dongle in OpenCPN and AvNAV. This means that you use the USB dongle as the system key rather than losing your license when you upgrade anything on the Raspberry Pi. Not everything is finished just yet on OpenPlotter 4 but using the HAT, this has to be the best Open-Source setup available.

Kit used:

https://thepihut.com/products/raspber... - Pi5 8GB
https://shop.pimoroni.com/products/nv... - NVMe Base & Drive
https://shop.openmarine.net/home/23-m... - MacArthur Hat

Config Lines:
sudo nano /boot/firmware/config.txt
dtparam=pciex1_gen=3

sudo raspi-config

00:00 - Intro & Pi5 Boot speed
01:58 - NVMe Base
05:11 - Copy drive
05:36 - Config changes
07:12 - O-Charts USB Dongle OpenCPN
09:30 - O-Charts USB Dongle AvNav
10:09 - OpenPlotter 4
10:58 - Pi5 MacArthur HAT

Our Website:
https://boatingwiththebaileys.com

Social Media:
Facebook:   / boatingbaileys  
Instagram:   / boatingwiththebaileys  
Youtube:    / boatingwiththebaileys  

If you wish to support us:
https://ko-fi.com/boatingwiththebaileys