Скачать или смотреть CCNA RIP EIGRP OSPF configuration with DHCP (Practical)

This tutorial is a practical demo to emphasize precise understanding on RIP, EIGRP and OSPF configuration. The demo uses a 3 Router network with 2600 series routers and 2900 series switches to ensure efficient end-to-end pinging between the networks. Also to note, DHCP has been used to disseminate IP addresses to the Access links.

Configuration parameters
[A] Network parameters are as follows:
1. Router 0 to Fa0/0 : 192.168.1.0/24
2. Router 0 to Router 2 : 192.168.2.0/24
3. Router 2 to Fa0/0 : 192.168.3.0/24
4. Router 2 to Router 1 : 192.168.4.0/24
5. Router 1 to Fa0/0 : 192.168.5.0/24
6. Router 1 to Router 0 : 192.168.6.0/24

[B] Configuration hint for Routing protocols are as follows:
1. RIP:
Router rip
Version 2
Network 192.168.1.0
Network 192.168.2.0
2. EIGRP
Router eigrp 10
Network 192.168.1.0 0.0.0.255
Network 192.168.2.0 0.0.0.255
3. OSPF
Router ospf 10
Network 192.168.1.0 0.0.0.255 area 0
Network 192.168.2.0 0.0.0.255 area 0

[C] Sample code for the first Router as follows:
en
conf t
int fa 0/0
ip address 192.168.1.1 255.255.255.0
no sh
int s 1/0
ip address 192.168.2.1 255.255.255.0
no sh
clock rate 64000
int s 1/1
ip address 192.168.6.1 255.255.255.0
no sh
clock rate 64000
exit
ip dhcp pool one
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
exit
router rip
ver 2
net 192.168.1.0
net 192.168.2.0
net 192.168.6.0