How to Replace Front Inner Tie Rod 2002-2009 Chevrolet Trailblazer

Buy Now!
New Tie Rod Set from 1AAuto.com http://1aau.to/ia/1ASFK01119
New Tie Rod from 1AAuto.com http://1aau.to/ia/1ASTE00280

This video shows you how to replace the inner tie rods on your 2002-2009 Chevrolet Trailblazer. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2007 Chevrolet Trailblazer LT 4.2L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2002 Chevrolet Trailblazer
2003 Chevrolet Trailblazer
2004 Chevrolet Trailblazer
2005 Chevrolet Trailblazer
2006 Chevrolet Trailblazer
2007 Chevrolet Trailblazer
2008 Chevrolet Trailblazer
2009 Chevrolet Trailblazer

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obt9/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/oYZ/1AXAA00020
• 24mm Wrench
• 19mm Socket
• 22mm Socket http://1aau.to/op5/1AXAA00266
• Inner Tie Rod Removal Tool http://1aau.to/oaQ/1AXAA00438
• Adjustable Wrench
• Metal Cutters
• Needle nose pliers http://1aau.to/oFI/1AXAA00051
• Needle nose pliers http://1aau.to/oFI/1AXAA00052
• Pliers
• 1/2 Inch Impact Gun http://1aau.to/ovP/1AXAA00252
• 3/8 Inch Impact Gun
• Torque Wrench http://1aau.to/oaRz/1AXAA00044
• Cloth Rags http://1aau.to/oGH/1AXSS00035
• Copper Anti-Seize
• Cotter Pin
• Gloves http://1aau.to/oauK/1AXSS00048
• Liquid Thread Locker
• Safety Glasses
• Wire Ties
• Floor Jack http://1aau.to/oafr/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/o3S/1AXAA00065
• Nylon Brush http://1aau.to/ouX/1AXAA00079
• Pick http://1aau.to/oTX/1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Chevy Trailblazer 2002-2009 1st Generation:    • Chevy Trailblazer 2002-2009 1st Gener...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.