Chrysler Town and Country cranks but won't start fix!

My 2012 Town and Country van started having an issue lately where the starter would crank repeatedly but wouldn't start. After reading up on the issue, I found that it was due to a faulty TIPM fuel pump relay. Up to this point if I could get it started it would run, because the relay would kick on the pump. If the battery was low and I jumped started the car, sometimes that would work because having the extra voltage helps the relay turn the pump on. I also noticed after shutting the van off once that the pump continued to run for 10 minutes, which is not normal and drains the battery leading me back to step 1 of jumping the car.

Fortunately there is a company called Vertical Visions that makes a really easy $59+shipping plug and play fix for this problem. In the video I go through issue, install the fix, and show it working again. This video was not sponsored, as I was actually having this issue and bought the part as the solution. I would highly recommend checking the company out below if you are having the same issue with you Chrysler, Dodge, Jeep, or Ram between the years 2008 up to 2020 in some models.

https://verticalvisions.com/en/17-tip...

Possible Models that use this relay
2008-2016 Chrysler Town and Country
2011-2013 Dodge Durango
2008-2020 Dodge Grand Caravan
2009-2010 Dodge Journey
2007-2011 Dodge Nitro
2011-2013 Jeep Grand Cherokee
2007-2012 Jeep Liberty
2007-2018 Jeep Wrangler
2014 Lancia Voyager
2011-2012 Ram 1500, 2500, 3500
2012-2014 Ram C/V
2009-2014 VW Routan
2011 VW Touareg

2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020