Chapter 3 - Configuring Lithernet Gateway

Welcome to Chapter 3, where we delve into the detailed steps required for integrating Adquio devices with Casambi networks. In this chapter, we'll guide you through the process of configuring the Lithernet controller.

Key Steps Covered:

Connecting the Lithernet Controller:

Connecting the controller to your laptop using a network cable and PoE injector.
Logging into your laptop to access the Lithernet.
Setting Up Network Configuration:

Configuring your laptop’s IP to be in the same range as the Lithernet Gateway.
Adjusting network settings through the control panel.

Accessing the Lithernet Gateway:

Logging into the Lithernet Gateway using the default IP (192.168.1.90).
Setting up a user and password for training purposes.

Configuring the Lithernet Gateway:

Navigating through the System and Wizard settings.
Selecting BACnet IP as the protocol.
Setting the local device ID and UDP port.
Configuring the "Use Broadcast" function for synchronized control of luminaires.
Setting "Start Device" and "Device Count" for device integration.

Casambi Network Integration:

Understanding how to configure Casambi devices, groups, and scenes.
Adjusting settings to control luminaires on a per-device basis if needed.
Rebooting the Lithernet Gateway to apply configurations.

Advanced Settings:

Adjusting the Casambi settings for optimal refresh rates.
Configuring the network settings for compatibility with Adquio controllers (Pro, Lite, Mini).
Ensuring correct IP configuration and disabling DHCP when necessary.

By the end of this chapter, you'll have your Lithernet Gateway fully configured and ready to integrate with Adquio devices. Stay tuned for Chapter 4, where we will explore how to extract and filter information from the Lithernet Gateway to Adquio. See you in the next chapter!