Скачать или смотреть Cimco MDC-Max Setup Basics

Cimco MDC-Max Setup with Moxa IOLogic units

When you install Cimco MDC-Max it will not have any configuration.
You need to define the configuration yourself.
This is because it is highly configurable and can be used in a thousand ways.

But a good place to start is to set up a scheme that will work for any machine on the floor.
When where might be machines that can provide additional information like feed rate etc.

Common for any machine are cycle/no-cycle and for most machines alarm/no-alarm and part complete.

But you don't need to start from skratch everytime!
You can import configurations in MDC-Max.
Build you own library of favorite configurations or get samples from others to build on.

You are welcome to use the configuration from the link below:

https://drive.google.com/drive/folder...

The mdc configuration is the three file: *.mms, *.mml, *.mmr
The *.cbk file is a back up of the dncmax configuration.
The *.ncb file is a backup of the ncbase database