How to Replace Driver Side Door Power Window Regulator 2006-2013 Chevrolet Impala

Buy Now!
New Power Window Motor & Regulator Assembly from 1AAuto.com http://1aau.to/ib/1AWRG01076

This video shows you how to install a driver side door power window regulator on your 2006-2013 Chevrolet Impala. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!

This process should be similar on the following vehicles:
2006 Chevrolet Impala
2007 Chevrolet Impala
2008 Chevrolet Impala
2009 Chevrolet Impala
2010 Chevrolet Impala
2011 Chevrolet Impala
2012 Chevrolet Impala
2013 Chevrolet Impala

Tools you will need:
• Pocket Screwdriver
• 10mm Socket http://1aau.to/ot7/1AXAA00017
• 7mm Socket http://1aau.to/ot7/1AXAA00017
• Trim Tool Set http://1aau.to/ohR/1AXXX00006
• Complete Torx Bit Set http://1aau.to/oeJ/1AXAA00008
• T30 Bit http://1aau.to/oeJ/1AXAA00008
• 1/4 Inch Ratchet http://1aau.to/ot7/1AXAA00017
• 3/8 Inch Drive Ratchet http://1aau.to/oxF/1AXAA00015
• Duct Tape
• Gloves http://1aau.to/oc2/1AXSS00048
• Safety Glasses http://1aau.to/occ/1AXAA00343

Subscribe:    / @trq  

Check out our playlist:
Chevrolet Impala 2006-2013 9th Generation:    • Chevrolet Impala 2006-2013 9th Genera...  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.