e156: Ampro Tamiya Hotshot Rear Suspension Upgrade

Thank you for watching my video! The parts featured in this video can be found here:

047001-01 Hotshot Front Suspension Set
http://shpws.me/QoZN

047002-01 Hotshot Rear Suspension Set
http://shpws.me/Qn11

You will need two additional 12mm M3 self tapping screws for the top brace (unless you have a mechanical speed control then they are already there) . We also recommend a 14mm M3 self tapping screw in place of the 12mm units in the bulkhead. For the bottom, a 14mm M3 self tapping screw is recommended to replace the 12mm units in the bulkhead also and two 8mm M3 self tapping screws are needed to hold the rear of the brace down.

Please visit my store here:

Shapeways: https://www.shapeways.com/shops/ampro

Please, visit my sites:
Facebook:   / amproengineering  
Instagram:   / amproengineering  

Many of my designs and threads can be located at
http://www.tamiyaclub.com/forum/index...

If you enjoy the music featured on my videos, please visit Blue Pinto’s official site here:
  / bluepinto  
https://www.reverbnation.com/bluepinto

I always enjoy constructive criticism and would love to know what you think about my designs.

Please subscribe as I have hundreds of other upgrades for many, many other cars, rc cars, toys, and anything else that I think needs upgrading!

**I have no tolerance for disrespectful posts, foul language, cyber-bullying, sexism, homophobia, racism and anything else that has no place in society. This is a family friendly channel so I have soap next to me for every time I say a bad word. Any foul or abusive post will be removed and you will be reported to YouTube.**