etrailer | Review of Bulldog Jack - Swivel Jack - BD151159

Click for more info and reviews of this Bulldog Trailer Jack:
https://www.etrailer.com/Trailer-Jack...
Check out some similar Trailer Jack options:
https://www.etrailer.com/dept-pg-Trai...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Bull...
Michael: Hi there. I'm Michael with etrailer.com. Today we're taking a look at the Bulldog round weld on jack. This is a manual side wind jack. It's going to have a lift capacity of 2000 pounds and a static capacity of 3000 pounds.I'm going to give you a few measurements here to help you decide if this is going to be the right jack for you. So you can see our mounting bracket here on the back from the center of that bracket down to the bottom of our foot.

When it's retracted like it is now, it's going to be 14 and a half inches. When you have this extended all the way up, it's going to measure 29 and a half inches. Again from the center of that bracket down to the base, so that's going to give you 15 inches of lift, which should be more than enough for most of your applications.It's got the tubular swivel design, so it's going to let you mount weld your weld plate onto your trailer. And then obviously since mine's not welded on, the bracket's going to swivel, but once you have this welded on, your jack will swivel up so it can go up for travel and then down for when you need to use it. It's going to include the half inch pull pen.

You can see it's going to lock it in place so that our jack can stays where we need it to be. From the center, again of our mounting bracket to the top of our jack, it's going to be 12 and three-sixteenths of an inch. It's going to give us our clearance.One thing I really like is the side wind handle. It's going to be very smooth, very easy to crank our jack up and down. It's not going to take much effort at all.

The handle radius, it's right about six inches. And this is a very dependable jack, it's recognized as the industry standard for your agricultural and commercial applications. It's ASABE compliant.Your outer tube here is painted gray. It's got a diameter of two and nine-thirty seconds of an inch or just under two and a quarter of an inch. Your inner tube is zinc plated, so it's going to reduce the risk of rust and corrosion, and the inner tube diameter is two inches.

Here on the top you can see we've got our zerk or grease fitting to help lube the internal components, keep those in good condition, and this jack does come with a five year warranty from Bulldog. That's going to complete our look at the Bulldog round weld on jack.