Скачать или смотреть How to Assemble Elve Stride 2

Before you assemble your pump, make sure that the relevant parts have been cleaned and disinfected as per the instructions above.

Wash your hands thoroughly with soap and water before touching Elvie Stride 2 and its components. You should avoid touching the inside of the cup front and breast shield.

To assemble your pump:

1. Start by making sure that all the parts are completely dry, especially the Diaphragm and Stopper.
2. Push the hub connector firmly into the hub, making sure that it is fully inserted.
3. Push the valve into the cup front. Once you’ve pushed the valve in, take care not to twist it or move it. Milk can pool in the nipple tunnel if the valve is twisted.
4. Use your fingers to work the diaphragm rim over the cup front. Take a moment to check the diaphragm is sitting flush and is on securely. Close the stopper.
5. Fit the Breast Shield over the Cup Front. Ensure it’s sealed tightly all the way around and there are no gaps. The Cup Front should be fully covered by the lip of the Breast Shield. You can also use a Nipple Insert here if needed.
6. Check that the Diaphragm is completely dry as moisture can be sucked into the Hub. This affects the performance of your pump.
7. Push the Cap over the Diaphragm onto the Cup Front, ensuring that the tube is aligned with either the left or right channel.
8. Attach the Hub to your clothing using the clip.