How to put ExpressLRS 3.0 on your Tiny Whoop (SPI receiver workaround)

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate...

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/

---

My ExpressLRS 3.0 overview video is -    • ExpressLRS 3.0 full release overview  

Download the latest nightly build of the BF configurator at - SEE BELOW
Download the "assets.zip" file containing the nightly BF build at - SEE BELOW

EDIT: Dale Larson has built a version of BF 4.3.1 with ELRS 3.0 code built in. I strongly recommend using this instead of the BF 4.4 nightly build, since nightly builds may not be stable. Download the hex files at: https://github.com/DLLarson/betafligh...

How to configure and work with ELRS SPI receivers -    • SPI-based ExpressLRS receivers are th...  

"Bad size given" error when flashing ELRS 3.0 -    • ExpressLRS 3.0 "Bad Size Given" "Not ...  

---

00:00:00 - SPI receiver + ELRS 3.0 = problem
00:00:59 - You might hesitate to do this
00:01:51 - Some features are left out of this "special" version
00:03:11 - How to download the code
00:03:52 - These are "generic targets". What does that mean?
00:05:10 - How to find your "board-specific" target name
00:06:05 - Always back up your config first!
00:06:15 - Flash the hex file to your FC
00:06:34 - You MUST select the right target name in Betaflight
00:07:33 - Download nightly configurator too
00:08:11 - Does it work????
00:10:29 - Invalid size error