How To Cancel E2 Error Code On Procool Coolers

Iron Mountain Refrigeration and Equipment, LLC
10550 86th Ave Ste 101
Pleasant Prairie, WI 53158
phone: 833-734-8880
email: [email protected]
www.ironmountainrefrigeration.com

This video will explain how to cancel E2 error code on Iron Mountain Refrigeration Procool coolers.

Steps:
1.Press and hold the bottom right Arrow (or DOWN) button until the controller reads H-ZERO-ZERO. Release.
2. Press bottom arrow button until the controller reads H-ZERO-SEVEN.
3. Press the snowflake button. Press the set button one time.
4. Press and hold the SET button to St. Press the Light Bulb (or UP) button to PO. Press SET to 00.
5. Press and hold the SET button to St.
6. Press the Light Bulb (or UP) button to PO. Press SET to 00.
7. Press and hold the UP BUTTON to 55. This will get you into the parameter menu. Press SET to PO.
8. Press UP to D1. Press SET.
9. Adjust to 00. Press SET.
10. Press the bottom right Arrow(or DOWN) button to C1. Adjust to 6. Press SET.
11. Press UP to C4. Press SET. Adjust to 00. Press SET.
12. Press UP to C5. Press SET.
13. Adjust to your LOWER SET POINT. Press SET.
14. Press UP to C6. Press SET.
15. Adjust your UPPER SET POINT to 6 degrees above your LOWER SET POINT. Press SET.
16. Press UP to d4. Press SET.
17. Adjust to 06. Press SET.
18. Press UP to d5. Press SET.
19. Adjust to 02. Press SET.
20. Press UP to d6. Press SET.
21. Adjust to 25. Press SET.
22. Press UP to d8. Press SET.
23. Adjust to 2. Press SET.
24. Press the SNOWFLAKE button to back out of the parameter menu.
25. Press and hold SET to St. Press SET and adjust to your desired lower set point temperature.
26. Press SET to save your changes.

Your changes have now been saved.