How To Set Up Your Ilios Beauty Ring Light (in under 90 seconds!)

Описание к видео How To Set Up Your Ilios Beauty Ring Light (in under 90 seconds!)

Learn how to set up the Ilios Beauty Ring light.

First, remove the tabletop base from the box and place it on a flat surface. You'll notice the tabletop base has four rubber pads on the bottom to keep it from sliding or scratching surfaces.

Next, grab the ring light and insert it onto the tabletop base. Tighten the screw knob. Insert the power cord into the back of the ring light. The power cord is multi-voltage and can be used worldwide. You may need to add a plug adapter depending on the type of outlet required.

Power on the light using the large center button located on the front of the ring light. The light can dim or increase by pressing the button located to the left of the power button. There are five dimming levels.

Color can change by pressing the button located to the right of the power button. Color modes are cool, blend and warm. We recommend using the cool made for makeup application.

The mirror can be rotated by pressing the mirror in the 3 o'clock and 9 o'clock positions exposing either the 1x side or magnified 5x mirror. To remove the mirror, rotate half way and press down on the release button located at the top of the mirror. Pull the mirror towards you to release.

To use as a ring light, pull down the metal arm located at the back of your ring light.

Release the phone holder from the back pocket and insert it into the metal arm. The adjustable phone holder can be positioned in both a horizontal or vertical position. A smartphone can be powered through the USB-A charging port.

To insert the mirror, line up the open hole with the post located on the inside bottom of the ring light. Slide the mirror under the second knob situated at the top of the ring light until it locks in place, making sure to center it over the post while holding onto the release clamp.

To mount the light onto a light stand, set up your light stand on any flat surface. Loosen the knob to remove the light from the tabletop stand. Attach the light to the light stand and secure the knob in place.

Any questions, please don't hesitate to reach out to us at contact@ilioslighting.co

Комментарии

Информация по комментариям в разработке