Vacuum Pressing Changes Everything!. Next Level Woodworking Skills.

Everything you need to get started in vacuum press veneering. Brought to us by Squarespace. For 10% off your first purchase, go to: http://squarespace.com/makesomething

Take your woodworking to the next level with vacuum press veneering. Veneering allows you to get the most out of valuable woods and use plywood and MDF when you need to avoid expansion and contraction. Using a vacuum press will get you more pressure and more even pressure than clamps alone. A vacuum press also allows you get pressure where clamps could never go and work around curved surfaces for creative woodworking. Depending on your budget there are multiple ways to get into vacuum pressing. At the upper end are dedicated vacuum pumps that automatically shut off and on to maintain pressure over long periods of time. The middle ground is a continuous pump as we're using in the video. And the cheapest introduction into vacuum press veneering is using a hand pump. Vacuum bags can be purchased or made. Although you can use regular wood glue, there are special glues used when vacuum forming that prevent bleed through and dry harder than typical PVA glues.

Join the Make Something Patreon and get behind the scenes access as well as our private discord!   / picciuto  

Supplies used in this video (Provided by Rockler)
Vacuum Bag: https://bit.ly/3xkuaDO
Vacuum Pump: https://bit.ly/3tuH4y0
Vacuum Pods: https://bit.ly/3NHx38R
Vacuum Port Adapter: https://bit.ly/3NOKYtS
Hand Pump: https://bit.ly/3tu5esB
Veneer Saw: https://bit.ly/3MH5N8U
Veneer: https://bit.ly/3HkTRJa
Veneer Glue: https://bit.ly/3Hb4ga6
Glue Roller: https://bit.ly/3aOcvg1
Netting: https://bit.ly/3mySb5f

#woodworking