Honda Africa Twin Valve Adjustment

Subscriber mentioned in this video: ‪@tommylitchfield3450‬

In this video I show you how to check and the process to adjust your valves on a Honda Africa Twin. I explain/demonstrate the entire process from what you need to remove to going through how to check the valve clearances. I didn't need to adjust mine however I walk though how you would if you need to. While doing this I find I need to badly change my coolant which required me to ordered a few parts that I'm waiting on.
00:00 Intro
01:25 Remove Seat
01:35 Remove 4 Bolts Holding Fairing to Gas Tank
01:46 Remove 4 Bolt Holding Air Box Cover
01:56 Remove Fuel Shut Off Knob
02:33 Remove 2 Rear Bolts Holding Fuel Tank
02:53 Lift Rear Of The Fuel Tank To Get Access
03:30 Remove 3 Fuel Tank Hoses
04:35 Remove Fuel Tank
06:15 Finish Removing Both Front Fairing
07:17 Right Hand Radiator Removal
10:33 Left Hand Radiator Removal
12:48 Next Day
13:33 How to Actual Drain Radiator Fluid
14:43 Air Box Removal
16:41 Loosen Rear Cylinder Inspection Covers
18:01 Loosen Front Cylinder Inspection Covers
18:56 Remove One Spark Plug Out of each Cylinder
20:50 Remove Timing Rotor Access Covers
21:53 How to Turn Over the Motor
23:18 Turning the Motor for Front Cylinder Top Dead Center
25:17 How to Make Sure Your At Top Dead Center
26:29 Valve Clearance Specifications
27:55 Front Cylinder Exhaust Valve Check
28:33 Front Cylinder Intake Valve Check
29:18 Turn The Motor for Rear Cylinder Top Dead Center
30:29 Check to Make Sure Rear Cylinder is at TDC
31:16 Rear Cylinder Exhaust Valve Check
31:42 Rear Cylinder Intake Valve Check
32:07 How to Adjust Valve If Required
34:32 Copy of The Haynes Manual Procedures
34:40 Reinstall Inspection Covers
35:28 Replace/Install Spark Plugs
37:10 Outro
#adventure #classiccars #motorcycle #africatwin #maintenance #doityourself #DYI #honda #hondaafricatwin #valve