Wiring Your Honeywell Resideo Vista: The Ultimate Guide

If you're interested in any of the products in the video or other equipment related to the Honeywell/Resideo Vista system, DSC NEO system, or Qolsys IQ Panels, check out AlarmSystemStore.com

In today's video, we're taking a bit deeper look at the wiring terminals on the Honeywell/Resideo Vista panels. Each terminal on the main board will be explained, along with what types of devices you would connect to each as well. This applies to the Honeywell Vista 15P and the Honeywell Vista 20P. One thing not mentioned in our previous Honeywell wiring video are the multiple items that you would have connected to different sets of terminals. A prime example is the CORBUS of the system. The 4 terminals you use to connect modules to the system is not only used for keypads, but also zone expander, relay modules, communicators and wireless receivers.

However, if you would prefer to see a more demo-style video of one of our techs attaching a few devices to the system you can follow the link below.
   • Honeywell Vista Series Wiring - Alarm...  

We'll also be going over zone wiring terminals, the bell circuit and the available phone line wiring although phone lines are much less common nowadays. This video is a bit on the long side, but gives valuable insight to new installers and DIYers that wish to set up a Honeywell system. Understanding the physical wiring connections is the basis for knowing what the Honeywell/Resideo Vista panels are capable of.