Скачать или смотреть BUZZRACK Buffalo Bike carrier - How to fit

Click here http://www.roofbox.co.uk/bike-carriers/ to see our full range of bike carriers.

The BUZZRACK Buffalo is not only a smart looking bike carrier, it's also the best designed and most user friendly bike carrier of its type at any price.

These carriers are supplied ready to go so there is no assembly work required.

The patented conical tow ball clamp fits onto all 50mm diameter tow balls, even the ones which don't meet BS standards because they have rough casting around the tow ball neck.

Fitting is a matter of spinning a hand-turning wheel, a really quick, easy thing to do. Turn the key in the tightening wheel and the carrier is then locked to the tow ball. Give a Nyloc nut a tweak with the supplied spanner and then the carrier is held really firmly.

The Buffalo has been TÜV approved for 4 bikes to the proposed ISO standard R18-904-4, a standard some way tougher than current requirements.

Tilting is a safe single-handed operation, even with the bikes fitted; the carrier tilts far enough for use even on vehicles with vertical tailgates. Push the tilt lever with your foot while supporting the bikes and lower them down - this is safe and easy.

The bike frame holders usually need to be adjusted on the support arms first time out - distances between bikes may vary - before being tightened in place with the tool supplied. They have properly padded cradles and easily adjusted rubber straps.

There's a really neat integrated locking cable; the cable slides into the tubular upright when not in use.

The support arms are 28cm apart, centre to centre, a distance which will suit the majority of modern frames; we supply a telescopic cross bar for use with non standard frames - see 'frame adapter' below.
There's a Velcro-fastened sleeve on the upright to protect the first bike, incorporating a tough closed-cell foam pad.

Two top quality 300cm safety straps are also provided (buckles sewn not crimped). One of these should be threaded through all the bike wheels to prevent swaying and friction damage - it's up to you to provide any extra protection required - and the other should be passed through all the bike frames and then looped around the carrier.

The bike holder arms are easily moved from the horizontal to the vertical - ideal for storage or when the vehicle is parked up.
Dimensions = 84.5cm high from the centre of the ball and 67.0cm deep from ball centre.

A lighting board will be needed, there's even one designed specifically for the Buffalo.