Z690 Classified EVGA DDR5 RAM Installation

Installing RAM in your PC is a straightforward process. Here’s a step-by-step guide:

Check Your Motherboard Manual: Read your motherboard’s manual to determine which slots your memory should be installed in. Look for information on dual-channel configurations if your motherboard supports it.

Unlock the DIMM Slot: On your motherboard, locate the DIMM slots where you’ll install the RAM. Unlock the clip on the side of the DIMM slot.

Align and Insert: Line up the notch on your memory stick with the divider in the DIMM slot. Lower the RAM into the DIMM slot firmly and ensuring it’s correctly aligned.

You should hear a click once its seated properly.

That’s it! You’ve successfully installed RAM in your PC. Enjoy the performance boost!

The Ram I used for this video is The Corsair Vengeance RGB DDR5 32 GB (2 x 16 GB) memory kit, model CMH32GX5M2B6400C36, offers the following specifications:

Capacity: 32GB (2x16GB)
Speed: 6400MT/s
CAS Latency: CL36
RGB Lighting: Features individually addressable ten-zone RGB lighting.
Intel® XMP Ready