How to Replace Exhaust Manifold Catalytic Converter Assembly 2011-2019 Ford Explorer 3.5L V6

Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from 1AAuto.com http://1aau.to/ib/1AEEM00829

This video shows you how to install a new exhaust manifold catalytic converter assembly from TRQ on your 2011-2019 Ford Explorer (3.5L V6). This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.

This repair was done on a 2013 Ford Explorer Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2011 Ford Explorer
2012 Ford Explorer
2013 Ford Explorer
2014 Ford Explorer
2015 Ford Explorer
2016 Ford Explorer
2017 Ford Explorer
2018 Ford Explorer
2019 Ford Explorer

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obDS/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/o6N/1AXAA00020
• 19mm Wrench http://1aau.to/oaar/1AXAA00010
• 22mm Wrench
• 10mm Socket http://1aau.to/obCc/1AXAA00017
• 13 mm Deep Socket
• 13mm Socket http://1aau.to/obZF/1AXAA00015
• 14mm Socket http://1aau.to/obZF/1AXAA00015
• 15mm Socket http://1aau.to/obZF/1AXAA00015
• 8mm Socket http://1aau.to/obCc/1AXAA00017
• Trim Tool Set http://1aau.to/oatT/1AXXX00006
• Pliers
• Ratchet http://1aau.to/ob4a/1AXAA00016
• Torque Wrench http://1aau.to/oa6I/1AXAA00044
• Cloth Rags http://1aau.to/oMm/1AXSS00035
• Gloves http://1aau.to/oaUC/1AXSS00048
• Rust Penetrant
• Safety Glasses
• Drain Pan
• Floor Jack http://1aau.to/oatt/1AXAA00068
• Hammer
• Jack Stands http://1aau.to/oafw/1AXAA00065
• Pick http://1aau.to/oZT/1AXAA00037
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.