Master Clutch Cylinder UPGRADE Jeep Wrangler YJ 1988 - Wilwood USA

I give my 1988 Jeep Wrangler YJ with the BA10 Transmission a master clutch cylinder upgrade. I install a new clutch line and a new speed bleeder to help make the bleeding process a lot easier.

My master clutch cylinder needed to be replaced and while researching online I happen to find this forum that explained issues that a guy was having with his clutch. Supposedly some master clutch cylinder replacement have a double cup instead of an o-ring and that allows for potential air from entering the clutch system.

I show you how to perform this guide using a master cylinder from Wilwood, new clutch line, and speed bleed.

----------
PARTS USED

-Wilwood Master Cylinder
3/4 Bore size
Part number: 260-15098

-ECON 5/16 x 5/16-24 Female RH
Rod Ends Heim Joint

-Russell Brake Bleeders Speed Bleeders,
1/4 in.-28 Thread, 1.0 in.
Part Number: 639540

-Allstar Performance ALL46332-48 (48")
Straight Braided Brake Line 3/8-24
From Amazon

-Inline Tube Replacement for Brass Adapter
Male 3/8"-24 Inverted, Female 7/16"-24 Inverted
From Amazon

-Dorman Copper Washer Kit
Part Number: 66250
From Autozone

-Prestone Max Brake Fluid Dot 3
From Autozone
----------
Link To Jeep Forum
https://www.wranglerforum.com/threads...
Like, Subscribe and share! Thanks for watching :D!
----------
*Music at the End*

Music | Spaceship by Declan DP
Watch:    • Royalty Free Music | Spaceship by Dec...  
License: http://www.declandp.info/license
Download/Stream: https://hypeddit.com/link/v55qbp