Flame tuning Assetto Corsa | Add more flame and change flame color

⚠️Attention: not all the car have flame so check your car if it have flame or not, check this video how to do it
   • Assetto Corsa, add exhaust flames. Ho...  

   • Add anti-lag flame, pops flame💥🔥 Asse...  

🔣 Code:
[EXHAUST_FLAMES]
ANTILAG=1 ; turbo antilag, i havent tested this yet
ANTILAG_DELAY=0.0 ; how long after antilag trigger do flames start, in seconds
ANTILAG_INTENSITY=0.005 ; flame size
ANTILAG_INTERVAL_MAX=0.1
ANTILAG_INTERVAL_MIN=0.1
ANTILAG_TURBO_THRESHOLD=1
DAMAGE=0 ; engine damage? idk
DAMAGE_DURATION=0.00
DAMAGE_INTENSITY=0
DAMAGE_PROBABILITY=0
DISCHARGE=1 ; lifting off the throttle
DISCHARGE_CHARGE_TIME=0.001 ; how long you have to press the throttle to "charge" the flames
DISCHARGE_DELAY=0.5 ; delay after throttle lift
DISCHARGE_DURATION=1 ; length of flame shooting, in seconds
DISCHARGE_PROBABILITY=1; chance of flame shoot on lift, 1 is guaranteed, 0 is never
DISCHARGE_INTENSITY=30; flame size
DISCHARGE_RPM_THRESHOLD_MAX=9000 ; self explanatory
DISCHARGE_RPM_THRESHOLD_MIN=6000 ; self explanatory
DISCHARGE_WATER_TEMPERATURE_THRESHOLD=70
FLAT_SHIFT=1 ; on upshift
FLAT_SHIFT_COOLDOWN=0 ; after upshift
FLAT_SHIFT_DURATION=0.1 ; length of flame shooting, in seconds
FLAT_SHIFT_GAS_THRESHOLD=50 ; how much gas needs to be pressed on upshift for flame, 100 is wide open
FLAT_SHIFT_INTENSITY=15 ; flame size
FLAT_SHIFT_PROBABILITY=5 ; chance of flame shoot on upshift
FLAT_SHIFT_RPM_THRESHOLD=6000
LIMITER=1 ; on hitting the limiter
LIMITER_DELAY=0 ; delay, in seconds
LIMITER_INTENSITY=10 ; flame size
LIMITER_RPM_THRESHOLD=6000 ; limiter flames will not shoot below this rpm

[PARTICLES_FX_EXHAUST_FLAMES]
COLOR_MULT=0.8, 0.5, 1.0, 1.0
INTENSITY_MULT=1
SIZE_MULT=2.15
TEMPERATURE_MULT=2.0
#assettocorsa #tutorial