Скачать или смотреть Fixed the click or tick on the Axial SCX10III!!!

Here I show you how I fixed the clicking on the Axial SCX10III.

I have tried all of the suggestions about fixing the click or tick on the SCX10III, made sure all gears, transmission and portals, are in the correct orientation, pinion perfectly aligned. Nothing worked.

I noticed the shaft for the gears in the bell housing was a bit small or the gear bore hole was a bit big. The shaft is 4.91mm and the bore hole in the gear is 5.10mm. Major difference when we are taking about gears.

I put some 3m painters tape on the shaft at the pin to take up some slop.

IT WORKED. NO MORE CLICK!!

We need someone to make a shaft that is 5.10mm in thickness where the gear rides.
Please someone, do it.