Remove and Replace Rear Main Seal PORSCHE 911

Stopping oil leaks from the rear main seal can be tricky and time consuming if you don't get it right on the first try. Here's are few tricks to remove and replace the rear main seal for a hopefully leak free engine.
If you have any information about the Patrick Motorsports sensor pin location, please comment below to help me out.

Patreon   / ahhgaragetime  
Insta @ahhgaragetime
FB   / ahhgaragetime  
Website www.ahhgaragetime.com
Ahh Garage Time Email Stories:
https://mailchi.mp/b63353737df0/sign-...

00:00 Introduction Rear Main Seal
00:35 Remove Flywheel With Impact Gun
00:53 Degrease seal area
01:45 Pry old seal out with screwdriver
02:44 Measure depth of new seal
03:33 Clean seal area of case and crankshaft
04:19 Apply thin layer of grease to crankshaft
04:58 Apply small amount of 1184 to case seam
05:21 Oil seal lip and back of seal with motor oil
05:44 Trim plastic cup to fit over crankshaft
06:42 Tap seal in with a block of wood
10:38 Problem with Mark Sensor Location
12:45 Problem with throw out bearing size
13:12 Old Rubber Center Clutch Disk