Скачать или смотреть ATN X-Sight 5 Ballistic Calc Failure (Update - issues resolved with new firmware 5.1.04.461)

ATN Replaced the sight for the 3rd time and it has the new firmware. I was able to take it to the range and everything functions as expected.
After the trainwreck that was the first sight ATN sent me, they overnighted a replacement. While this sight does not have the reticle shift when focussing, it is still almost unusable. I have to power it on twice first, power up it is a black screen hold the power button for ~20 seconds and it turns off. Hit the power button again, and it comes up. The sight froze 3-4 times while just trying to get the menu up. Finally was able to access the menu and do a factory reset. This did not fix the power up issue, but I was at least able to navigate without locking up. It did freeze 2 times when trying to sight in, and I had to start over each time. Just like the 1st sight they sent me, there is no audio when recording in 4k.
Now the real issue. In this video, you will see how the ballistic calc fails badly. To the point the sight is dangerous. Basic ballistics the further the shot, the lower the reticle drops in the scope. In this case I have sighted the 22 rifle with subsonic ammo at 50 yards and should have about a 7.75MOA drop at 100. You will see in the sight it shows 8.55, but that is close enough for testing. Instead of dropping, the reticle shifts 2' up and to the right. When I zoom, it shifts back to zero. When I turned off ballistic calc, it shifted back up again until I zoomed out.