Скачать или смотреть Applying Tool Paths in OneCNC Mill Expert - CAM Training 1

In this training video, we will start applying tool paths to our part using OneCNC Mill Expert. Follow along as we move the part, create stock, and apply our first tool paths.

Key Topics Covered:

Moving the Part in the Z-Axis:
Moving the part so the top of the bosses are at Z0.
Using the move command with incremental input values.
Verifying the new Z0 position with verify tools.
Defining Stock:
Creating wireframe stock to confine tool paths.
Creating a solid model for stock used in tool path simulation.
Moving the stock to allow for a facing operation.
Performing a Facing Operation:
Selecting a tool from the tool library.
Adjusting spindle speed, feed rate, and other tool parameters.
Setting clearances and depths for the facing operation.
Generating and simulating the facing tool path.
Rough Machining with Z-Level Rough:
Manually creating a tool and setting parameters.
Choosing machining styles and approach methods.
Setting tool stepover amounts and depth of cut.
Selecting boundaries and constraining tool paths.
Generating and simulating the Z-level rough tool path.

Timestamps:
0:00 Introduction
0:09 Moving the Part in the Z-Axis
1:51 Defining Stock for Tool Paths
3:00 Creating Solid Model Stock
5:55 Performing a Facing Operation
9:52 Selecting and Defining Tools
11:01 Setting Clearances and Depths
11:52 Generating the Facing Tool Path
12:02 Simulating the Facing Tool Path
12:57 Applying Z-Level Rough Machining
13:35 Creating and Defining a Tool
14:58 Setting Machining Styles and Parameters
17:00 Selecting Boundaries for Tool Paths
18:35 Generating the Z-Level Rough Tool Path
19:05 Simulating the Z-Level Rough Tool Path
20:00 Conclusion

By the end of this video, you'll have a solid understanding of how to start applying tool paths in OneCNC Mill Expert. This tutorial covers essential steps for moving parts, defining stock, and performing initial machining operations.

Don't forget to like, comment, and subscribe for more training videos and updates.

Thank you for watching, and stay tuned for our next training video!