Скачать или смотреть PWM Output ExpressLRS BetaFPV 2.4 GHz Nano Receiver

File to change is "BETAFPV_2400_TX.h" in /ExpressLRS-master/src/include/target
Next, choose "Local
under firmware version in the ELRS configurator and build the .bin file.
Finally, upload and you're done!

Here is the file for BETAFPV_2400_TX.h

#ifndef DEVICE_NAME
#define DEVICE_NAME "BETAFPV 2G4RX"
#endif
#define USE_SX1280_DCDC
#define CRSF_RCVR_NO_SERIAL
// GPIO pin definitions
#define GPIO_PIN_NSS 15
#define GPIO_PIN_BUSY 5
#define GPIO_PIN_DIO0 -1
#define GPIO_PIN_DIO1 4
#define GPIO_PIN_MOSI 13
#define GPIO_PIN_MISO 12
#define GPIO_PIN_SCK 14
#define GPIO_PIN_RST 2
#define GPIO_PIN_LED 16
//#define GPIO_PIN_BUTTON 0
#define GPIO_PIN_RX_ENABLE 9 //enable pa
#define GPIO_PIN_TX_ENABLE 10
// PWM Definitions
#define GPIO_PIN_PWM_OUTPUTS {1, 3, 0}
// Output Power
#define POWER_OUTPUT_FIXED 1 // -10=10mW, -6=25mW, -3=50mW, 1=100mW
#define Regulatory_Domain_ISM_2400 1