SBEV 1300-2 Impact Drill Scope of Delivery

Characteristics
Rated input power1300 W
Output power730 W
Maximum torque44 / 16 Nm
Drill-Ø masonry24 mm
Drill-Ø concrete22 mm
Drill Ø steel16 / 10 mm
Drill-Ø soft wood40 / 25 mm
No-load speed0 - 1100 / 0 - 3100 rpm
Revolutions at rated load1100 / 3100 rpm
Maximum impact rate58900 bpm
Gears2
Chuck capacity1.5 - 13 mm
Collar diameter43 mm
Drill spindle with hexagonal recess6.35 mm
Drill spindle thread1/2 " - 20 UNF
Chuck clamping typeGeared Chucks
Weight (without power cable)2.8 kg
Cable length4 m

Vibration
Drilling in metal4.2 m/s²
Uncertainty of measurement K1.5 m/s²
Impact drilling concrete17 m/s²
Uncertainty of measurement K1.5 m/s²

Noise emission
Sound pressure level103 dB(A)
Sound power level (LwA)114 dB(A)
Uncertainty of measurement K3 dB(A)

Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
Thumbwheel for Speed Preselection
Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
Robust die cast aluminium gear housing for optimum heat dissipation and long service life
Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
Metabo Marathon-motor with dust protection for long service life
Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
Forward and reverse rotation
Spindle with hexagonal recess for screwdriver bits for working without chuck
Overload protection: protects the motor from overheating
Restart protection: prevents unintentional start-up after power supply interruption
Cable-protecting ball joint for optimal freedom of motion when working
Wear Indication for Carbon Brush
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.