Meca cup review: Best sim pedals?

Meca cup review, the Best sim pedals?

Today we look at the Meca Cup 1's and see if these superb looking sim racing pedals can stack up against the VRS and Heusinkveld Sprints. featuring 100kg Loadcell in the brake pedals, and innovative design from 3mm laser cut stainless steel, these pedals will not flex!

update There where a couple of errors made in this film. Meca Cups do in fact come with 3 individual rubber bumpstops for each grade, not the two that I showed in the film, the set I used for this film are a demo set and some of the bumpstops have been lost during their life.
Also I quoted the wrong shipping rate in USD for the Meca's. The correct pricing is in the text on screen......... Sorry!

We will be adding a further film in a few days with a full on rig review of how they preform, including data comparisons with the VRS pedals and the Sprints.

These pedals were kindly loaned to us by Race at Home, who are the UK supplier for Meca Cup pedals, as well as OBP, Pimax VR, and they also offer a range of motion simulator rigs, for more info contact Bob or Aaron at https://www.raceathome.co.uk/


00:00 start
00:16 disclaimer
01:25 pedals.
03:02 Throttle pedal
08:10 Brake pedal
12:42 Clutch Pedal
15:42 Junction box
16:17 Pedal base plate
17:04 Pricing comparison Meca Cup1, Sprints, VRS
18:30 Brake Force Comparison
19:07 Weight comparison Meca Cup1 and Sprints
20:53 Final thoughts



Smoking Steel Garage is a channel dedicated to DIY fabrication, Sim racing, and general motoring shenanigans. I'm no expert in any of the above, But with a "can do" attitude I can usually get it done! My aim is to motivate you to have a go.


If you see me doing something wrong or you think there is better more effective way let me know in the comments below!

Big shout out to my favorite channels and sources of inspiration, if you haven't followed them already head over and take a look.

Davecam
Boosted Media
Sim Racing Garage
Urchfab
Trev's blog
Homebuilt by Jeff
Bad Obsession Motorsport



Follow me on


Facebook Smoking Steel garage:   / smokingsteel.  .

Instagram, @smokingsteelgarage

Twitch @SmokingSteelGarage

Discord   / discord  





The rig hardware is as follow.

VRS direct force pro wheelbase and Simline GT3 wheel
Heusinkveld Sprint pedals
Fanatec Clubsport shifter, Sequential and H pattern switchable
Carbon Kevlar Tillet race seat from a Caterham G7.

PC specs:
MSI Motherboard MPG Z390 Gaming edge
Intel core I5 9600K
EVGA GTX 1080 TI Graphics
Crucial P1 500gb NVME M2 SSD
Ransor Supersonic 16GB Ram, 2 x 8gb 3600MHZ DDR4
Castle 240R Liquid cooled CPU cooler
Deep cool DQ 750st Power supply
Matrexx 50 Case
Toshiba 4tb External Hard Drive

Triple 27'" MSI Optix Mag27c monitors, screens are set to 60° angle




Shot using Huawei P30 Pro
DJI Osmo mobile 3 gimbal
Razer Kiyo webcam
Blue Yeti Nano Microhone


Edited using Davinci Resolve 16 (Highly recommended and its free!)