How to Replace Starter 2008-2013 Nissan Rogue

Buy Now!
New Starter from 1AAuto.com https://trq.video/ib-1AEST00536

This video shows you how to install a starter on your 2008-2013 Nissan Rogue. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.

This repair was done on a 2009 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• 10mm Wrench https://trq.video/oTf-1AXAA00010
• 12mm Socket https://trq.video/obmL-1AXAA00015
• 16mm Socket https://trq.video/obmL-1AXAA00015
• 21mm Socket
• Socket Extensions https://trq.video/obmL-1AXAA00015
• Torque Wrench https://trq.video/oay5-1AXAA00044
• Gloves https://trq.video/oUG-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oYL-1AXAA00068
• Wheel Chocks

Subscribe:    / @trq  

Check out our playlist:
Nissan Rogue 2008-13 1st Generation:    • Nissan Rogue 2008-13 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.