Скачать или смотреть BAI Embroidery Machines Services Repairs & Lessons in Miami Florida

Computerized Control System for Embroidery Machine BECS-D56
Working status display area (waiting, embroidery, thread
breakage, completion)
Embroidery speed display: Real-time speed/maximum
speed set. Speed down / Speed up
Axis test: Test whether the X-axis motor, Y-axis motor,
main axis motor, and zero optocoupler are normal.
• Main axis 100 degrees: Click the main axis to turn to
100 degrees.
• Main axis 178 degrees: Click the main axis to turn to
178 degrees.
• Main axis 202 degrees: Click the main axis to turn to
202 degrees
Appliqué : If add appliqué in the current color, click this
key, and the pattern will be added after the current needle
number.
When embroider this color, it will automatically be out of
the frame and stop, waiting for the appliqué to be added.
After finishing, start the machine directly to continue
embroidery.
• If want to cancel the appliqué, click it again.
Low-speed embroidery : If a certain color needs to be at
a reduced speed, click this key, and "L" will be added
after the current needle number.
When embroider this color, speed will be reduced to 400
spm.
• If cancel low-speed embroidery, click it again.
Modify colors in batches, click this key.
At this time, the same colors will be selected, and then
re-select the color in the needle color display area.
• If cancel the batch modification of colors, click it
again.
Delete : Deletes the incorrect needle number midway
through setup.
1.Click incorrect needle number.
2.Click the delete icon.
3.Click OK to clear the subsequent color sequence
Machine Settings 51
Get PDF Manual From www.ibaima.com
Parameter Name Parameter Description Defaults
Auto Return Start Point
Whether return to start point after finished:
• If set yes, it will return to start point after finish.
• If set no, it will stop at the last one stitch point after finish.
Yes
Auto Return Offset
Whether the frame automatically shift to the top of the frame
after the embroidery is finished. (The parameters of the
embroidery frame must correspond to the size of the embroidery
frame)
No
Same Color Auto Start
Whether to auto start 2 adjacent same color.
• If set yes, adjacent 2 same color will start automatically.
• If set no, 2 adjacent same color , after first one
finished ,machine will stop, need to start 2rd color manually.
Yes
Back To Stop Point
Whether return to stop point when frame move halfway.
• If it is set to "Yes", it will.
• If it is set to "No", it will not.
No
Finish Beep
Whether to turn on the beep after embroidery is completed.
• If set to "Yes", there will be a beep.
• If set to "No", there will be no beep.
Yes
Positioning Red Light Mode
The red light positioning mode is turned on during tracing.
• If set to "Auto", the red light positioning will be turned on
automatically when tracking and the red light positioning is off
for other operations.
• If set to “Constant Light”, the red light will always be on after
power on.
• If it is set to “OFF”, the red light positioning will be turn off
under any operation.
Auto
Stop Frame Of Moving
Whether to pull the key to stop when crossing the frame.
• If set to "Yes", click key will stop.
• If it is set to "No", click key will not stop.
Yes
Auto Jump Stitchs
When long-step embroidery is jumping, when the stitch step
length exceeds a certain value, it will be automatically divided
into two or more stitches for embroidery.
6.5mm
completed.
• If set to "Yes", the embroidery will be repeated.
• If Set to "No", the machine will stop.
No
Thick Material Embroidery
Whether to choose embroidery thick material.
• If set to "Yes", the embroidery speed will be reduced.
• If it is set to "No", the embroidery speed will not be reduced.
No
Needles No. The number of needle currently used by the embroidery machine.
If the current machine uses 15 needles, set the parameter to "15". 15
Hole Needle Position
The Hole Needle Position is the needle number used when eyelet
embroidery and you need to set this value to the corresponding
needle position.
• This needle position does have thread breakage detection
during embroidery.
•When hole needle embroidery is not required, set to “0".
0
Make Up Stitch
How many stitches set in advance when make up is almost
finished, ask the rest of the non-make
up machine heads embroider together.
0
Make Up Method
When Embroidering, Whether All-Head Or Single-Head Make
Up.
• If set to “All Heads”, all heads will stitch during make up.
• If set to “single head”, only the thread-broken machine head
will stitch for making up.
Single
Reset Frame
Whether to find the absolute origin of the embroidery frame
when power on.
• If set to "Yes", every time the power on, the embroidery frame
will be reset , and the frame will automatically return to the
stop position before power off.
• If set to "No", it will not return to the stop position before
power off when the power on.