AuthentiKit PA-24 Comanche TPM - Self-Build Assembly Guide

This is the full step by step assembly video for the AuthentiKit replica PA-24 Comanche throttle, prop and mixture control, fully functional in a flight simulator. It is easily self-assembled either from an all inclusive kit of 3D printed parts & hardware (see below) or you can 3D print your own parts from free downloads and self-source the parts.

NO cutting, soldering, programming or drilling. These are projects for the kitchen table not the workshop.

You will need these links:

Assembly Guide/STL Files download: https://download.authentikit.org/file...

SimHanger preview video:    • New Throttle Quadrant designed for yo...  

AuthentiKit main website: https://authentikit.org/pa24/

Buy an all-inclusive kit: https://www.simkitsupplies.com/produc...
Buy hardware only kits: https://www.simkitsupplies.com/shop/

Join our community: https://authentikit.org/community-pow...
Twitter updates:   / flyauthentikit  

Facebook updates:   / flyauthentikit  

​Reviews of AuthentiKit gear: https://authentikit.org/reviews/


Credits
---
Designed by Phil Hulme with the kind support of A2A Simulations. Get their Comanche for MSFS from https://a2asimulations.com/product/ac...

00:00:00 Introduction
00:01:46 AuthentiKit system explained
00:03:32 Sourcing - how to get this
00:05:35 Preparation - before you start
00:06:14 Unboxing the SKS All-Inclusive Kit
00:09:30 Assembly steps begin
00:13:35 Fit the bushes and felt
00:21:37 Assemble the MagHall units
00:39:49 Assemble the knobs
00:42:52 Fit the knobs to the case
00:55:12 Fit the parking brake
01:00:00 Wiring up the TPM RJ45 connector
01:10:03 Lid on and complete the TPM unit
01:11:20 Assemble universal hub & demo carb heat knob switch
01:21:44 PC connection
01:23:19 Windows calibration