Скачать или смотреть RV Roof Repair: Installing Roof Trim

For a detailed writeup in regards to how to install a new roof on a camper or RV, just out this guide: https://www.remodelyourrv.com/how-to-...

Here is the rubber roofing kit I purchased for this project: https://amzn.to/2F4KIbk

The rubber (EPDM) roof is finally on and now it's time to reattach the trim around the sides and the termination bars. We also get to work on the molding/insert that fits into the trim to cover up the heads of the screws.

This isn't a complicated process, it just takes a little effort and an extra set of hands is a big help.

Be sure to apply a nice even layer of butyl tape the entire length of each piece. When securing the trim, pull down the EPDM membrane to create a tight, but not stretched, fit.

Once the butyl tape is installed, reattach the trim using your cordless drill and the proper screws. Start from the middle of each trim piece and work your way around the entire RV completing this process. Now it’s time to seal up all the trim by using sealant on the front and rear termination bars.

Cut excess roofing material from underneath the trim to create a nice, finished look.